Accessories

Accessories

Temperature control valve

  • Model type: CXYG-15E-20E

    Water meter box suits meter sizes Ø 15 to 20 mm (1/2” – 3/4”), single jet and multi jet water meter are well be installed inside, protect from stolen. Material is PE plastic.

    More >>
  • Model type: RLM-15-25

    Multi jet detachable heat meter has it's bottom part. Sizes Ø 15 to 25 mm (½” – 1”), temperature ranges from 4°C to 95°C. To clear contamination at pipelinebefore heat meter installation

    More >>
  • Model type: YG100066

    Temperature three, Ø15 to 40 mm (½” – 1”1/2), PN16 Bar, the coupling can be mounted in inlet or outlet pipeline to fit temperature sensor pair.

    More >>
  • Model type: Brass connector

    Connectors set for water meters (2 nuts, 2 tailpieces, 2 gaskets). Brass material, food rubber for gaskets

    More >>
  • Model type: Brass connector

    Tailpiece for water meters with a built-in non-return valve. To be mounted on the water meter out-let. Minimum working pressure: 0.05 bar. Maximum working pressure: 16 bar.

    More >>
  • Model type: YG-0303

    Magnet filter, sizes Ø 15 to32 mm (½” – 1" 1/4)

    More >>
  • Model type: YG-0000166

    The ball valve can be mounted in inlet or outlet pipeline to fit temperature sensor pair.

    More >>
  • Model type: Mechanism - multi jet

    The mechanism(dry type, wet type for option)isfrom 15mm to 50mm are available.The material of mechanism for cold water meter is ABS, while for hot water meter is PPO.Dial printing is according toclients' requirements.

    More >>
  • Model type: YG-WKF-01

    Temperature control, sizes Ø 15 to 25 mm (½” – 1”), available for water 120°C, PN16Bar

    More >>
//